Yaskawa DriveWizard AC Drive User Manual download pdf (Page 50)

First File O

ened

Parameter Value in Parameter

Editor S

readshee

Parameter Value in loaded file

File Menu

Second File O

ened

Figure 4.25: Compare Parameter File Screen

This window will only display the parameters that are different. If there are no differences, the

window below will be empty. The name and location of each parameter source is displayed in

the windows title bar. “Working value” is the current setting of the first file opened, or the

current setting within the parameter editor. “File value” is the setting in the second file loaded.

Change Database

Toolbar: None

Menu: File > Change Database

Hot Keys: None

This function is used to change the working database that DriveWizard uses to interface with

parameter files and the drive it is connected to. The selected database determines which drives

can connect online, which files can be opened, which files can be compared, and which files can

be downloaded to the drive. The selection must take place while DriveWizard is in the offline

mode or not connected to a drive.



Note!

If the change database menu item does NOT appear in under File Menu you

have only 1 database installed in your DriveWizard installation (Typical or

minimum selection during installation). If you determine you need a specific

database that is not standard drive, you must re-install DriveWizard using

the Custom install selection (see Chapter 2 – Installation).

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 153 154

No comments

Yaskawa DriveWizard AC Drive User Manual Page 50