Yaskawa Remote Display Controller LAN Node PCB for use wit User Manual

RD 790-20Effective 2/14/941REMOTE DEVICEUSER REFERENCE SHEETFORREMOTE DISPLAY CONTROLLER LAN NODE PCB(RDC)Part No. 46S02790-0020, -0040, -0050, or -0

10detailed help information about that mode ofoperation. Pressing HELP while in a helpmode will give general help information.The help information is

Item number 0 will show the activelock state (“Locked” or “Unlocked”) for theselected RDU on the bottom line of thePCDU. Item numbers above 0 will sh

12LED STATESThe LED on the RDC is used to indicate the operating status of the RDC.RDC OPERATINGLED STATE STATUS On, steady Power is appl

2RD 790-20CONTENTSINTRODUCTION...3HARDWARE DESCRIPTION...

INTRODUCTIONThis document explains thehardware and software operations of theRemote Display Controller LAN Node PCB(RDC).The Remote Display Controller

4LAN NODE ADDRESS SWITCHESThe LAN Node address switches allowfor the selection of the network ID. The RDCmay have a Node address from 100 to 199.Sinc

specific RDUs. The default menu items and the order of the menu items are determined by the PAC programmer.Local RDU When referring to a keyboard, th

65. RDU, keypad, and lockout switch. The keypad allows the operator the same functions as in D, above. The lockout switch will enable or disable t

4. “ERR-MSG CONFLICT”. This message will be displayed to indicate that more than one drive attempted to assign a menu item to the same menu itemnumbe

8The +/- key may also be used in thenumber modification process. The functionof this key is to change the sign of thedisplayed number. The actual si

modified, then the RDU will show the datadefined by the newly entered menu itemdata. Any modifications made are onlytemporary and once a new menu ite