Yaskawa CM052 User Manual download pdf

Yaskawa Electric America, Inc – www.drives.com

IG.V7.13, Page 1 of 5

Date: 07/01/04, Rev: 04-07

DeviceNet

Option Card and Ring Kit

CM052

Unpack the V7 DeviceNet Option and verify that all components are present and undamaged.

Part Qty.

V7 DeviceNet Option Card and Ring Kit 1

Mounting Bracket 1

M3×8 Screw 1

6” Ground Wire (150mm) 1

8.5” Ground Wire (220mm) 1

12.5” Ground Wire (320mm) 1

Installation Guide (IG.V7.13) 1

Connect power to the drive and verify that the drive functions correctly. This includes running the

drive from the operator keypad. Refer to the V7 Technical Manual, TM.V7.01, for information on

connecting and operating the drive.

Installing the V7 DeviceNet Option obscures the I/O, power and motor terminals on the V7 drive. It

is necessary to make these connections prior to installing the V7 DeviceNet Option. Check that all

connections have been made and are working correctly before continuing.

Remove power from the drive and wait for the charge lamp to be completely extinguished. Wait at

least five additional minutes for the drive to be completely discharged. Measure the DC BUS

voltage and verify that it is at a safe level.

Prepare the drive for the V7 DeviceNet Option.

# Remove the V7 operator keypad and terminal cover.

# Remove the plastic protective cover from over the CN2 connector and install

the option mounting bracket provided on to the drive.

Connect the ground wire provided to the ground connector on the back of the V7

DeviceNet Option. Select the ground wire of appropriate length for the drive.

Mount the V7 DeviceNet Option onto the drive

# Align the CN1 connector on the back of the option with its mating CN2

connector on the front of the drive.

# Simultaneously align the CN3 connector, the male RJ45 connector, on the back

of the option with the CN1 connector, the female RJ45 connector, on the front

of the drive.

# Align the tabs on the option with their corresponding slots on the front of the

drive.

# Press the option and the drive together until the tabs lock into their associated

slots.

# Secure the option to the V7 drive by tightening the locking screw at the top-

center of the option.

# Connect the ground wire from the V7 DeviceNet Option to ground terminal on

the V7 drive.

Align hole in

mounting bracket

with nib on front of

the V7 drive

Secure mounting

bracket to V7 drive

with M3x8 screw

Remove the CN2

protective cover by

carefully clipping

the three tabs

Option

mounting

bracket

CN2 Cover

CN1 - CN2

Tab

CN3 - Male RJ45

Connector

CN1 - Female

RJ45 Connector

Slot

Tab

Slot

Ground Terminal

Ground Wire

1 2 3 4 5

Summary of Contents

Page 1 - Option Card and Ring Kit

Yaskawa Electric America, Inc – www.drives.com IG.V7.13, Page 1 of 5 Date: 07/01/04, Rev: 04-07 DeviceNetTM Option Card and Ring KitCM052! Unpack the

Page 2 - Date: 07/01/04, Rev: 04-07

Yaskawa Electric America, Inc – www.drives.com IG.V7.13, Page 2 of 5 Date: 07/01/04, Rev: 04-07 ! Connect to the DeviceNet network as shown in the fig

Page 3 - IG.V7.13, Page 3 of 5

Yaskawa Electric America, Inc – www.drives.com IG.V7.13, Page 3 of 5 Date: 07/01/04, Rev: 04-07 ! Remove power from the drive and wait for the charge

Page 4 - IG.V7.13, Page 4 of 5

Yaskawa Electric America, Inc – www.drives.com IG.V7.13, Page 4 of 5 Date: 07/01/04, Rev: 04-07 ! LED Status Indicators and Diagnostics LED Display PW

Page 5

Yaskawa Electric America, Inc – www.drives.com IG.V7.13, Page 5 of 5 Date: 07/01/04, Rev: 04-07 DeviceNet TM Option Card and Ring Kit CM052 Copies

Related models: CM05X

Comments to this Manuals

No comments

Yaskawa CM052 User Manual

Browse online or download User Manual for Equipment Yaskawa CM052. Yaskawa CM052 User Manual

Summary of Contents

Related models: CM05X

Comments to this Manuals

Related products and manuals for Equipment Yaskawa CM052