YASKAWA VS-626M5 Specifications download pdf (Page 200)

100

101

PC NC Maintenance Manual Chapter 6: Module/Unit Replacement

6-18

3. Tighten the four mounting screws.

4. Insert the floppy disk drive data and power connectors in their original loca-

tions.

Following installation, verify functions as follows.

1. Power up the CPU rack.

2. Verify that the floppy disk drive is displayed on the BIOS screen at boot-up.

3. Insert a floppy disk in the floppy disk drive unit and test access to the floppy

disk drive from the MMI to verify proper function.

6.4 NC Power Supply

Remove the numeric control power supply as follows.

1. Turn the main power off.

2. Remove all connections from the power supply terminal block.

3. Remove the power supply.

Install the numeric control power supply as follows.

1. Mount a new power supply to the same location as the original unit.

2. Tighten the mounting screws.

3. Connect all wires into their original locations.

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 300 301

Comments to this Manuals

No comments

YASKAWA VS-626M5 Specifications Page 200

Comments to this Manuals

Related products and manuals for Power adapters & inverters YASKAWA VS-626M5