Yaskawa SI-W3 User Manual download pdf (Page 25)

6 Related Parameters

YASKAWA ELECTRIC TOBP C730600 56A 1000-Series Option SI-W3 Installation Guide 25

F6-08

(36A)

Reset Communication

Parameters

Determines which F6- and F7- parameters are reset to

default values when initializing the drive using A1-03.

0: Do not reset parameters

1: Reset parameters

Default: 0

Range: 0, 1

<1> Setting F6-01 or F6-03 to 3 will allow the drive to continue to operate after detecting a fault. When allowing the

drive to continue operation after fault detection, be sure to take proper safety measures such as installing an

emergency stop switch.

<2> Enabled in CLV, AOLV/PM, and CLV/PM control modes (A1-02 = 3, 6, or 7). When enabled, d5-01 determines

whether the value is read as the torque limit value (d5-01 = 0) or read as the torque reference value (d5-01 = 1).

This value is read as the torque limit in CLV/PM.

<3> Setting specifies that the torque reference or the torque limit is to be provided with Torque Reference/Torque

Limit Selection from Comm. Option (F6-06 = 1). The motor might not rotate if a torque reference or a torque limit

is not received from the network.

No.

(Addr.

Hex)

Name Description Values

TOBP_C730600_56A_0_0_E.fm 25 ページ２０１１年１１月２日　水曜日　午後６時１０分

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

No comments

Yaskawa SI-W3 User Manual Page 25