Yaskawa SI-W3 User Manual download pdf (Page 30)

7 Network Variables

30 YASKAWA ELECTRIC TOBP C730600 56A 1000-Series Option SI-W3 Installation Guide

■ Object Status

Output: FSNVT_obj_status nvoStatus

Displays the status of objects in a node.

Member Name Description

object_id Object ID (refer to the object request)

bit 31 invalid_id Turns ON if the object_id specified by nviRequest is invalid.

bit 30 invalid_request Turns ON if the object_request specified by nviRequest is invalid.

bit 29 disabled

Indicates whether or not a given object is enabled for operation.

Turns ON when an object is disabled.

bit 28 out_of_limits Not supported. (Always 0.)

bit 27 open_circuit Not supported. (Always 0.)

bit 26 out_of_service Not supported. (Always 0.)

bit 25 mechanical_fault Not supported. (Always 0.)

bit 24 feedback_failure Not supported. (Always 0.)

bit 23 over_range Not supported. (Always 0.)

bit 22 under_range Not supported. (Always 0.)

bit 21 electrical_fault Not supported. (Always 0.)

bit 20 unable_to_measure Not supported. (Always 0.)

bit 19 comm_failure Not supported. (Always 0.)

bit 18 fail_self_test Not supported. (Always 0.)

bit 17 self_test_in_progress Not supported. (Always 0.)

bit 16 locked_out Not supported. (Always 0.)

bit 15 manual_control Not supported. (Always 0.)

bit 14 in_alarm Not supported. (Always 0.)

bit 13 in_override Not supported. (Always 0.)

bit 12 report_mask Not supported. (Always 0.)

bit 11 programming_mode Not supported. (Always 0.)

bit 10 programming_fail Not supported. (Always 0.)

bit 9 alarm_notify_disabled Not supported. (Always 0.)

bit 8 to 0 reserved Always 0.

TOBP_C730600_56A_0_0_E.fm 30 ページ２０１１年１１月２日　水曜日　午後６時１０分

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 79 80

No comments

Yaskawa SI-W3 User Manual Page 30