Date: 02/20/05, Rev: 05-02 Page 1 of 15 TM.V7SW.091 Rev. <1>: July 19, 2001, VSP015164 Rev. <2>: January
Date: 02/20/05, Rev: 05-02 Page 10 of 15 TM.V7SW.091 KEB Re-acceptance Prohibition Time (Parameter n145) Used when you do not want to repeat KEB o
Date: 02/20/05, Rev: 05-02 Page 11 of 15 TM.V7SW.091 2.6 Timing Charts KEB Using DC Bus Voltage Detection When a KEB command is not set to the m
Date: 02/20/05, Rev: 05-02 Page 12 of 15 TM.V7SW.091 KEB Command Using Multi-function Digital Input Programming the KEB command to a multi-functi
Date: 02/20/05, Rev: 05-02 Page 13 of 15 TM.V7SW.091 In Case of Rapid Deceleration Only When KEB Starts In case of power loss exceedin
Date: 02/20/05, Rev: 05-02 Page 14 of 15 TM.V7SW.091 2.7 How to Adjust Cycle the power supply during constant speed operation or acceleration/dec
Date: 02/20/05, Rev: 05-02 Page 15 of 15 TM.V7SW.091 2.6 Guidelines of Selection and Adjustment Regenerative power required to continue operation
Date: 02/20/05, Rev: 05-02 Page 2 of 15 TM.V7SW.091 1. Basic Specification The basic specifications of KEB (Kinetic Energy Back-up) function are
Date: 02/20/05, Rev: 05-02 Page 3 of 15 TM.V7SW.091 2. Details of KEB Specification 2.1 Basic Circuit The KEB function becomes active when paramete
Date: 02/20/05, Rev: 05-02 Page 4 of 15 TM.V7SW.091 2.2 Added / Modified Parameters No. 5.5/7.5kW standard VSP010104 5.5/7.5kW KEB software VSP0152
Date: 02/20/05, Rev: 05-02 Page 5 of 15 TM.V7SW.091 2.4 KEB Function Related Parameters No. Modbus Register Name Description Setting Range Initial
Date: 02/20/05, Rev: 05-02 Page 6 of 15 TM.V7SW.091 No. Modbus Register Name Description Setting Range Initial Value Remarks n049 0131H Stall Prev
Date: 02/20/05, Rev: 05-02 Page 7 of 15 TM.V7SW.091 2.5 Description of Operation Basic Operation Setting parameter n081 (Selection of Operation af
Date: 02/20/05, Rev: 05-02 Page 8 of 15 TM.V7SW.091 Multi-function Digital Outputs (Parameters n057 to n059) When the KEB function is programmed,
Date: 02/20/05, Rev: 05-02 Page 9 of 15 TM.V7SW.091 Undervoltage Detection Level (Parameter n140) UV1 trip voltage is set when the KEB function i
Comments to this Manuals