16
VS mini J7
PROGRAMMING FEATURES
Programming features of VS mini J7 are explained
according to the following items.
Accel time : Sets the time needed for the motor to
accelerate to the maximum output
frequency from the stopped status.
Decel time : Sets the time needed for the motor to
stop from the maximum output frequency.
Item Setting Function
Ref.
Page
• Accel/decel time setting
• V/f pattern setting
• Motor rotation direction setting
• LOCAL (operator) /REMOTE
(control circuit terminal) selection
• Motor rated current setting
• Operation mode selection
• Constant set-up
• Reverse run prohibit
• Multi-step speed selection
• Adjusting frequency setting signal
• Operation at low speed
• Adjusting frequency upper and
lower limits
• Using two accel/decel times
• Automatic restart after momentary
power loss
• Soft-start characteristics
• Torque detection
• Continuing operation by automatic
fault reset
• Frequency detection
• Avoiding resonance
• Operating coasting motor without trip
• Holding accel/decel temporarily
• Using frequency meter or ammeter
• Reducing motor noise or leakage current
• Operator stop key selection
• Selecting stopping method
• Applying DC injection braking
23
23
23
18
18
19
19
19
19
20
20
20
20
21
21
21
22
22
22
Items Should
be Verified
Before
Operation
Setting
Operating
Condition
Selecting
Stopping
Method
• Using input signals
• Using output signals
23
25
Building
Interface
Circuits with
External
Devices
• Adjusting torque according to application
• Preventing motor from stalling
(current limit)
25
26
Adjusting
Motor Torque
• Slip compensation 27
Decreasing
Motor Speed
Fluctuation
• Motor overload detection 27
Protecting
Motor
16
16
17
17
17
17
17
Sets the V/f pattern which matches the motor characteristics.
When operating at 50/60Hz or more frequency, change only
the max. output frequency (n09) as follows.
Items Should be Verified Before Operation
The set value displayed in is factory setting.
Accel/decel time setting
Accel time 1, 2
Decel time 1, 2
N19N17
N18N16
V/f pattern setting
Max. output frequency
Max. voltage
Max. voltage output frequency
N11
N10
N09
Comments to this Manuals