Yaskawa EtherNet/IP User Manual download pdf (Page 14)

5 Installation Procedure

u

Section Safety

DANGER

Electrical Shock Hazard

Do not connect or disconnect wiring while the power is on.

Failure to comply will result in death or serious injury.

Disconnect all power to the drive and wait at least the amount of time specified on the drive

front cover safety label. After all indicators are off, measure the DC bus voltage to confirm

safe level, and check for unsafe voltages before servicing. The internal capacitor remains

charged after the power supply is turned off.

WARNING

Electrical Shock Hazard

Do not remove the front covers of the drive while the power is on.

Failure to comply could result in death or serious injury.

The diagrams in this section may include options and drives without covers or safety shields

to show details. Be sure to reinstall covers or shields before operating any devices. The

option should be used according to the instructions described in this manual.

Do not allow unqualified personnel to use equipment.

Failure to comply could result in death or serious injury.

Maintenance, inspection, and replacement of parts must be performed only by authorized

personnel familiar with installation, adjustment, and maintenance of this product.

Do not touch circuit boards while the power is on.

Failure to comply could result in death or serious injury.

Do not use damaged wires, stress the wiring, or damage the wire insulation.

Failure to comply could result in death or serious injury.

Do not use damaged wires, place excessive stress on wiring, or damage the wire

insulation.

Failure to comply could result in death or serious injury.

5 Installation Procedure

14

YASKAWA TOEP YAICOM 16A 1000-Series Option Dual-Port EtherNet/IP SI-EN3D Installation Manual

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 49 50

Comments to this Manuals

No comments