Yaskawa EtherNet/IP User Manual download pdf (Page 8)

2 Product Overview

About this Product

The option provides a communications connection between the drive and an ODVA EtherNet/

IP network. The option connects the drive to an EtherNet/IP network and facilitates the

exchange of data.

This manual explains the handling, installation and specifications of this product.

EtherNet/IP is a communications link to connect industrial devices (such as smart motor

controllers, operator interfaces, and variable frequency drives) as well as control devices (such

as programmable controllers and computers) to a network. EtherNet/IP is a simple, networking

solution that reduces the cost and time to wire and install factory automation devices, while

providing interchangeability of like components from multiple vendors.

EtherNet/IP is an open device network standard.

By installing the option to a drive, it is possible to do the following from an EtherNet/IP master

device:

• Operate the drive

• Monitor drive status

• Change drive parameter settings.

Applicable Models

The option can be used with the drive models in Table 1.

Table 1 Applicable Models

Drive Series

Drive Model Number

Software Version

<1>

A1000

CIMR-Ao2Aoooo

1010 and later

CIMR-Ao4A0002o to 4A0675o

CIMR-Ao4A0930 and 4A1200 301o

CIMR-Ao5Aoooo 504o; 1017 and later

<1> See “PRG” on the drive nameplate for the software version number.

2 Product Overview

YASKAWA TOEP YAICOM 16A 1000-Series Option Dual-Port EtherNet/IP SI-EN3D Installation Manual

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 49 50

No comments

Yaskawa EtherNet/IP User Manual Page 8