YASKAWA NX100 Operator's Manual download pdf (Page 276)

2.7 Arc Welding Instruction

2-254

(1) ARCCTS AC=150 AV=16.0 DIS=100.0

MOVL V=80

To make the welding current =150A and arc voltage =16V, the current and the volt-

age are changed in the section of 100mm from the move start point.

Gradually Decreasing Current or Voltage

Gradually Increasing Current or Voltage

(2) ARCCTS AC=150 AV=16.0 AN3=7.50 AN4=6.50 DIS=100.0

To make the welding current =150A, arc voltage =16V, aimed value =7.5V of the

instruction voltage to analog output 3, and aimed value =6.5V of the instruction volt-

age to analog output 4, the current and the voltage are changed in the section of

100mm from the move start point.

Example

Value immediately before execution

 of move instruction

ARCCTS aimed value

ARCCTSexecuted

Welding continues

DIS =100

Move distance specified

by move instruction

Value

 immediately before

execution of move instruction

ARCCTS aimed value

ARCCTSexecuted

Welding continues

DIS=100

Move distance specified

by move instruction

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 296 297

Slawomir.wawrzaszek 22 Jan 2024 | 17:21:35

Obsługa robora

YASKAWA NX100 Operator's Manual Page 276