Yaskawa F7 Drive User Manual User Manual download pdf (Page 201)

Parameters A - 36

Key Selections

o2-01

Local/Remote Key

Function

Selection

Local/Remote Key

Determines if the Digital Operator Local/Remote key is

functional.

0: Disabled

1: Enabled

0 to 1 1 A A A A

o2-02

STOP Key Function

Selection

Oper STOP Key

Determines if the STOP key on the Digital Operator will stop the

Drive when Drive is operating from external terminals or serial

communication.

0: Disabled

1: Enabled

0 to 1 1 A A A A

o2-03

User Parameter Default Value

User Defaults

Allows storing of parameter settings as a User Initialization

Selection.

0: No Change

1: Set Defaults - Saves current parameter settings as user

initialization. A1-03 now allows selecting <1110> for user

initialization and returns o2-03 to zero.

2: Clear All - Clears the currently saved user initialization. A1-03

no longer allows selecting <1110> and returns o2-03 to zero.

0 to 2 0 A A A A

o2-04

Drive/kVA Selection

Inverter Model #

Sets the kVA of the Drive. Enter the number based on Drive model

number. Use the last four digits of the model number.

CIMR-F7U.

This parameter only needs to be set when installing a new control

board. Do not change for any other reason. Refer to Table B.1.

0 to FF

Va ri es

kVA

AA A A

o2-05

Frequency Reference

Setting Method Selection

Operator M.O.P.

Determines if the Data/Enter key must be used to input a frequency

reference from the Digital Operator.

0: Disabled - Data/Enter key must be pressed to enter a frequency

reference.

1: Enabled - Data/Enter key is not required. The frequency

reference is adjusted by the up and down arrow keys on the

Digital Operator without having to press the data/enter key.

0 to 1 0 A A A A

o2-06

Operation Selection when

Digital Operator is

Disconnected

Oper Detection

Determines if the Drive will stop when the Digital Operator is

removed when in LOCAL mode or b1-02=0.

0: Disabled - The Drive will not stop when the Digital Operator is

removed.

1: Enabled - The Drive will fault (OPR) and coast to stop when the

Digital Operator is removed.

0 to 1 1 A A A A

o2-07

Cumulative Operation Time

Setting

Elapsed Time Set

Sets the initial value of the elapsed operation timer U1-13.

0 to

65535

0H A A A A

o2-08

Cumulative Operation Time

Selection

Elapsed Time Run

Sets how time is accumulated for the elapsed operation timer

U1-13.

0: Power-On Time - Time accumulates when the Drive is

powered.

1: Running Time - Time accumulates only when the Drive is

running.

0 to 1 0 A A A A

o2-09

Initialization Specification

Selection

Init Mode Sel

Determines parameter default values after a Drive initialization

(A1-03) is executed. This should always be set to "1" for North

American installations.

1: American spec

Possible damage to equipment or injury may occur if this setting is

changed from “1: American Spec.” O2-09 is a macro parameter that

can change the default values of terminal I/O and many other

parameters in the drive. Consult the Yaskawa factory for details if

adjustment is required.

11AAAA

o2-10

Cumulative Cooling Fan

Operation Time Setting

Fan ON Time Set

Sets the initial value of the heatsink fan operation time monitor

U1-40.

0 to

65535

0H A A A A

o2-12

Fault Trace/Fault History

Clear Function

FLT Trace Init

Clears the fault memory contained in the U2 and U3 monitors.

0: Disabled - no effect

1: Enabled - resets U2 and U3 monitors, and returns o2-12 to zero.

0 to 1 0 A A A A

o2-14

kWh User Monitor

Initialization

kWH MonitorClear

Used to reset the kilowatt-hour monitor U1-29 to zero.

0: Disabled - no change

1: Enabled - Resets U1-29 to zero and returns o2-14 to zero.

0 to 1 0 A A A A

Denotes that parameter can be changed when the Drive is running.

Table A.1 F7 Parameter List (Continued)

Parameter

No.

Parameter Name

Digital Operator Display

Description

Setting

Range

Factory

Setting

Control Method

V/F

w/PG

Open

Loop

Vector

Flux

Vector

WARNING

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 254 255

Yaskawa F7 Drive User Manual User Manual Page 201

Comments to this Manuals

Yaskawa F7 Drive User Manual User Manual Page 201

Comments to this Manuals

Related products and manuals for Equipment Yaskawa F7 Drive User Manual