Yaskawa Matrix Converter User Manual download pdf (Page 54)

2-20

* 1. For a 3-wire sequence, the default settings are a 3-wire sequence for S5, multi-step speed setting 1 for S6 and multi-step speed setting 2 for S7.

* 2. When driving a reactive load such as a relay coil, always insert a flywheel diode as shown in Fig 2.20.

* 3. Use the photocoupler outputs when the minimum permissible load is 5 VDC or less and 10 mA or less.

Fig 2.20 Flywheel Diode Connection

Photo-

coupler

outputs

Multi-Function PHC Output

Default: Zero-speed

Zero-speed level (b2-01) or below when on.

50 mA max at 48 VDC

Multi-Function PHC Output

Default: Frequency agreement detection

Frequency within 2 Hz of set frequency

when on.

Photocoupler output common

for P1 and P2

Multi-Function PHC Output

Default: Ready for operation when on.

Multi-Function PHC output 4 Default: FOUT frequency detected when on.

Relay

outputs

Fault Output Signal (NO con-

tact)

Fault when CLOSED across MA and MC

Fault when OPEN across MB and MC

Dry contacts

Contact capacity:

10 mA min. 1 A max at

250 VAC

10 mA min. 1 A max at

30 VDC

Minimum permissible

load: 5 VDC, 10 mA

Fault Output Signal (NC con-

tact)

Relay contact output com-

mon

Multi-function contact output

(NO contact)

Default: Operating

Operating when on across M1 and M2.

Analog

moni-

tor out-

puts

Multi-Function Analog Mon-

itor 1

Default: Output frequency

0 to 10 V/100% frequency

0 to +10 VDC ±5%

2 mA maxAM

Multi-Function Analog Mon-

itor 2

Default: Current monitor

5 V/MxC rated current

AC Analog common -

RS-

485/

422

R+

MEMOBUS Communica-

tions Input

For 2-wire RS-485, short R+ and S+ as well

as R- and S-.

Differential input, photo-

coupler isolation

R-

S+

MEMOBUS Communica-

tions Output

Differential output, pho-

tocoupler isolation

S-

IG Communications shield wire - -

Table 2.8 Control Circuit Terminals (Continued)

Type

No. Signal Name Function Signal Level

External power:

48 V max

Coil

Flywheel diode

50 mA max

The rating of the flywheel diode

must be at least as high as the

circuit voltage.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 397 398

Comments to this Manuals

No comments

Yaskawa Matrix Converter User Manual Page 54

Comments to this Manuals

Related products and manuals for Equipment Yaskawa Matrix Converter